Specifications

J326XP-IM-5AB

2-4

Description

Controls and Indicators

Figure 2.1 The Power Switch

Control Panel

The control panel (Figure 2.2) is mounted at an angle on the centrifuge top rear for easy visibility

and access. It contains a digital display for actual and setup values, knobs and touch keys for

parameter entry, and additional touch keys for system control.

Figure 2.2 The Control Panel

Digital Display

The display shows current status of the instrument whenever the power is turned on.

• The display shows both actual centrifuge values and user-set parameters. The

SET/ACTUAL key

is used to toggle between the two views.

• During a run, actual values are displayed. If you turn a knob (other than the

TIME knob) during

operation, the display will change to show the set values. If no parameters are entered or

changed for 5 seconds, the display will revert to showing actual values.

• During a timed run, the

TIME display shows the remaining run time in hours and minutes. The

TIME display begins counting down when START is pressed and continues counting down to 0,

when deceleration begins. When the rotor decelerates to 0 rpm,

End flashes in the TIME display.

1. Digital Display