Specifications

J326XP-IM-5AB
1-3
Specifications and Preinstallation Requirements
Available Rotors
1
Available Rotors
Refer to the applicable rotor manual for complete rotor descriptions.
Electrical Requirements • 200/208/240-V, single-phase instrument
— 180–264 VAC, 30 A, 50/60 Hz
• 230-V, single-phase instrument
— 180–264 VAC, 30 A, 50 Hz
• 220/380-V plus neutral, three-phase
a
instrument
— 313–457 VAC plus neutral, 16 A, 50 Hz
Electrical Supply Class I
Maximum Heat
dissipation into Room
Under Steady-State
Conditions
2.0 kW (6900 BTu/h)
Humidity restrictions <95% (noncondensing)
Noise Level 0.91 m (3 ft)
in front of instrument at
26 000 rpm
57 dBa
Installation
(overvoltage) Category
II
Pollution Degree
2
b
a. Unbalanced three-phase. Split for single-phase operation internally.
b. Normally, only nonconductive pollution occurs; occasionally, however, a temporary conductivity caused by condensation
must be expected.
Specification Description
Rotor Profile Description
Rotor
Code
Max
RPM
a
Max
RCF
( g)
Max Capacity
Rotor
Manual
Number
JA-30.50 Ti
b
Fixed Angle, 34°
(8 place)
r
max
= 108 mm
30.50 26 000
c
81 800 8  50 mL J-TB-070
JA-25.50 Ti
Fixed Angle, 34°
(8 place)
d
r
max
= 108 mm
25.50 25 000 75 600 8  50 mL J-TB-056