Specifications

J326XP-IM-5AB

1-2

Specifications and Preinstallation Requirements

Specifications

Operational Features

Physical Data

Acceleration maximum or slow

Deceleration maximum, slow, or off

a. During transient conditions, such as acceleration and deceleration, rotor temperature may be outside this range. Refer to

applicable rotor manuals for specific rotor operating range information.

b. To reach temperatures above ambient, the centrifuge is dependent on the frictional heat generated inside the chamber

during operation. At low run speeds or low ambient temperatures, the centrifuge may not be able to achieve some higher

temperatures.

Specifications Description

Door 6.1-cm (2.4-in.) thick structural foam with steel plate

Rotor Chamber Diameter 51.3 cm (20 in.)

Friction Reduction

System (FRS)

190 mm (7.5 in.) Hg

Specification Description

Width 71 cm (28 in.)

Depth • 86 cm (34 in.)

• including air diverter extending from back panel

— 102 cm (40.25 in.)

Height • with door closed

— 86 cm (34 in.)

• to top of control head

— 116 cm (45.5 in.)

• to top of open door

— 149 cm (58.7 in.)

Weight 290 kg (640 lb)

Clearances

(for adequate

ventilation)

• sides

— 7.6 cm (3 in.)

• back (place air diverter against the wall)

— 16 cm (6.25 in.)

Surface Finish polyester control panel with polycarbonate coating overlay; polyurethane

enamel on door and covers; acrylic baking enamel on other surfaces