Specifications

20
STOP
AVANTI Service Lift for Wind Turbines
3.14 Bottom safety stop
The bottom safety stop will interrupt the up/
down movement if:
1) Encounters an obstacle.
2) Reaches the bottom mechanical stop
installed on the bottom of the ladder.
Upward travel will be possible from any user
control box, for instance to remove the obstacle
after necessary verifications.
3.15 Emergency limit stop switch
Emergency limit stop switch interrupts the
control if top stop limit switches fail.
To release the switch on the top plate: Perform
manual descent some meters.
To release the switch on bottom plate: tempo-
rarily remove the switch lever and put the lever
back afterwards and verify adjustment.
LOOK THROUGH THE PERFORATED
FLOOR OF THE CABIN TO SEE IF
ANYONE IS STANDING ON THE
LADDER.
BOTTOM STOP
SWITCHES
BOTTOM
SAFETY STOP
EMERGENCY LIMIT
STOP SWITCH
BOTTOM
MECHANICAL STOP