Specifications

19
User’s Manual
3.12 Bottom hatch
The service lift has a bottom hatch made of
one sheet which is opened inwards the
cabin. It can be used in case of evacuation.
(SEE APPENDIX A)
A switch ensures that the hatch is closed
during operation. It interrupts the control of
any movement of the cabin if the hatch is
open or not closed properly. In this case the
fault light shines.
The dimensions of the hatch are 600 x 400
mm.
3.13 Top safety stop
The top safety stop will interrupt the up
movement if:
1) Encounters an obstacle.
2) Reaches the top mechanical stop is
installed on the top of the ladder.
Downward travel will be possible from any
user control box, for instance to remove the
obstacle after necessary verifications.
TOP HATCH
TOP FLOATING
FRAME
TOP STRUCTURAL
FRAME
TOP FLOATING
FRAME SWITCH
TO OPEN
PULL UP
TOP MECHANICAL
STOP
TOP STOP
SWITCHES
TOP SAFETY
STOP
BOTTOM HATCH
SWITCH AND
BOTTOM HATCH
SWITCH
ACTUATOR