Specifications

10
AVANTI Service Lift for Wind Turbines
Service lift
Cabin type Bucket type, front fence
(1.1 m) with double door
Service lift speed 19.4 m/min ± 10 % (50 Hz)
17.4 m/min ± 10 % (60 Hz)
Working load limit /
Nº persons (max)
250 Kg / 2 Persons
Travelling height 150 m
Operating
temperature
Standard -15ºC to +60ºC
Low temperature -25ºC to +40ºC
Survival temperature -30ºC to +80ºC
Traction system type Rack and pinion
Max. noise level 80 dB (A)
Power supply 3 kW, 16 A
3 Phase 400V, 50Hz / 60Hz
IP protection min. IP 54
Control voltage 24 VAC
Note: for special working conditions, check with the manufacturer
3.4.2 Traction system specifications
Traction system / Motor group
Power 2 x 1.5 kW
Gear box ratio
1 : 15 (50 Hz)
1 : 20 (60 Hz)
Rack / Pinion module 6
Centrifugal brake limiting speed 24 m/min
Dimensions 220 x 225 x 580 mm
Weight by motor group 30 Kg
Motor speed
1400 rpm (50 Hz) –
1680 rpm (60 Hz)
Nominal current 2 x 3 A
Start current 2 x 15 A
3.4.3 Cabin dimensions
Cabin
Cabin weight 225 Kg
Outer dimensions (W x D x H) 1060 x 715 x 2540 mm
Inner dimensions (W x D x H) 990 x 525 (680) x 2200 mm
Door opening (full) (W x H) 980 x 1120 mm
Top hatch dimensions (W x D) 600 x 400 mm
Bottom hatch dimensions (W x D) 600 x 400 mm
3.4.4 Power & control cable
Power & Control cable
Type Bottom platform
to juction box
18 G 2.5
Top platform
to junction box
8 G 1.5
Travelling cable 1 x 8 G 2.5 + 1 x 10 G 1.5
Travelling cable weight
(approx.)
0.6 Kg/m
3.4.5 Mast sections
Ladder rack (Mast)
Dimensions 530 x 30 x 1489 mm / 530 x 30 x 2978
mm
Weight (per piece) 15 Kg / 30 Kg
Attachment distance 1 per mast section, max. 3000 mm
3.4 Technical specifications
3.4.1 General specifications service lift