Specifications

FEATURES AND SPECIFICATIONS PAGE 5
Installation Options:
• Freestanding
• Masonry Fireplace Insert
• Zero-Clearance (Metal)
Fireplace Insert
Features:
• Works During Power Outages
(millivolt system)
• High Efficiency; Up to 80% for Natural Gas,
82% for LP (Steady State)
• Optional Thermostat or Remote Control
• Realistic "Wood Fire" Look
• Convenient Operating Controls
• Variable-Rate Heat Output
• Quiet Blower for Effective Heat Distribution
• Low Maintenance
Heating Specifications:
Approximate Heating Capacity (in square feet)* 600 - 1600
AFUE (Annual Fuel Utilization Efficiency) 68 %
Natural Gas LP (Propane)
High Burn Input Rate (In BTU's) 40,000 38,000
Low Burn Input Rate (In BTU's) 23,000 20,000
Efficiency** 80% 82%
* Heating capacity will vary with the home's floor plan and insulation, natural gas or Propane BTU rating, and outside temperature.
** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system.
To measure the net BTU's, multiply the BTU input by the efficiency percentage (80% for natural gas, 82% for LP).
Dimensions
20"
24-1/2"
12-1/4"
4-5/8"
31-1/8"
Vent Dia. 4"
28-7/8"*
8x10
Panels
31-7/8"*
10x13
Panels
4-5/8"
11-1/4"*
8-1/8"*
* Includes trim & standoffs
40-3/8"* 8x10 Panels
44-3/8"* 10x13 Panels
The center of the optional
45° vent adapter is 1-1/8"
behind the baseplate.
17-5/8"
1-1/8"
19-5/8"
21-3/4"
Standoff
Fuel: The heater is designed either for natural gas or for propane (but not
for both). Check the sticker on the top of the gas control valve.
Emissions: This unit has passed the ANSI emission standards for vented room
heaters as tested by OMNI Environmental Services, Inc.
Electrical Specifications: 115 Volts, 1.3 Amps, 60 Hz (150 watts on high)