Specifications

89SynopSys - The Small Business System
Telephone operation can be maintained with a
power failure unit routing Single Line Telephones
to the analog trunks.
If your SynopSys system is configured with an optional
Uninterruptible Power Supply (UPS), during a power
outage, the SynopSys system can be kept operating
for up to one hour and 40 minutes with a configuration
having 16 DIGITAL telephones or for up to three hours
for other configurations.
CONFIGURATION OPTIONS
Hardware
SynopSys comes in a single-compact, wall-mounted
cabinet, the size of an attaché case, that houses from
one to three modular system cards and one or two
power supply modules. The cabinet comes with the
Basic card and Basic power supply already installed.
With a single card, the SynopSys Basic system provides
up to four outside lines, up to eight Single Audio Port
DIGITAL telephone sets (or up to four Dual Audio
Port DIGITAL telephone sets), and a single line
telephone (In some countries, outside the United States,
the Basic system includes a second card providing
eight additional single line telephones).
To expand the system, you snap one or two expansion
cards in front of the Basic card, and insert the Expansion
power supply on the Basic power supply. The fully
expanded SynopSys system contains three cards and
two power supply modules. It provides a maximum of
33 ports (37 outside the USA).
The expansion cards provide additional ports for
DIGITAL telephone sets, single line telephones, ISDN
terminals, ISDN outside lines, or analog outside lines.
The SynopSys system also supports 36 button Add-
on units on any DIGITAL telephones connected to the
Basic card.
Programming
The SynopSys system automatically recognizes which
of the seven available Telrad DIGITAL telephone sets
is plugged into each port.
Two methods of configuration programming are
possible:
Programming from a telephone;
Programming from a PC.
When programming from a telephone, customization
of telephone outside line and system programming is
easily carried out using one of the following Telrad
DIGITAL telephone set with a display:
Executive station with expanded display;
Executive station with display;
Display speakerphone.
The fields being programmed are visible on the
telephone display.
Programming of the hardware configuration and the
whole range of features can be carried out easily using
a PC with the SynopSys configuration program. This
program includes programming screens that provide
online help that shows you the valid values for each
field you enter. Additional help screens are available
on many screens at the press of a function key.
The system can be configured and the data downloaded
to SynopSys either from a PC situated at the customer
location, or via modem, from a remote Service Center.