Specifications

86 Digital Key BX, Digital 400 & Digital 1000 Administration, Installation & Maintenance
ADMINISTRATION
The DIGITAL KEY BX, DIGITAL 400, and
DIGITAL 1000 systems' configuration is stored on a
memory cartridge attached to the Main Processing
Card (MPD). Software updates can be implemented
simply and easily by removing the current cartridge
and replacing it with an updated one.
In the SynopSys system, the software is stored on a
chip on the Basic card. The SynopSys system is a plug-
and-play system that comes with a basic configuration
already programmed. You can operate SynopSys with
the basic configuration, or you can easily modify it
using a designated telephone set or a PC.
Each DIGITAL installation and each extension within
a system, can be uniquely configured. The flexibility
of the configuration ensures that every customer always
receives the maximum benefit from the telephone
system.
The DIGITAL systems are configured via a PC using
programming screens that provide online help. As you
move from field to field, you are given the valid values
for the field. On many screens additional help screens
have been provided and are accessed by pressing a
function key. To aid in configuring the system, the
program has been developed to enable you to move
easily between related screens. After configuring the
system, the configuration data is easily downloaded to
the DIGITAL system.
The system can be configured either from a PC situated
at the customer location, or via modem, from a remote
Service Center. When working via modem, new
configurations or changes to the current configuration
can be prepared off site, and downloaded to the customer
system, without a technician having to visit the customer
site.
Most of these procedures cause no interruption to
system operation.
Detailed administration instructions for the DIGITAL
KEY BX, DIGITAL 400, and DIGITAL 1000
systems can be found in the DIGITAL Administration
manual and the DIGITAL 1000 addendum for the
DIGITAL family of systems and, for SynopSys, the
SynopSys Administration manual.
INSTALLATION
The DIGITAL systems can be installed in any office.
They are quiet and operate in most normal office
environments. They can be located almost anywhere
within the customer's premises. The SynopSys cabinet
is easily mounted on the wall with three screws. The
DIGITAL KEY BX system is mounted on the wall.
A mounting kit is available to simplify installation and
facilitate future expansion of the system. A wheel
assembly is available for use with a one- two- or three-
cabinet DIGITAL 400 system. A kit is also available
for mounting a single DIGITAL 400 cabinet on the
wall. The one- two- three- or four-cabinet DIGITAL
1000 system mounts on a wheel assembly. It comes
with individual power rectifiers in each cabinet, or
each cabinet can be connected to an external 48 Vdc
power source.
The Avanti telephones are installed with the DIGITAL
KEY BX, DIGITAL 400, and DIGITAL 1000
systems to provide the users with advanced, versatile
telephone sets. Up to four DSS Add-on units can be
connected to one Avanti set.