Specifications

69Digital Family Features
Busy Lamp Field
See Avanti telephone set features and PC Attendant
Features in Section 2, Terminal Units, above.
Call Register*
See PC Attendant Features in Section 2, Terminal
Units, above.
Call transfer
The attendant can transfer calls:
Screened
Unscreened
Handsfree
Confirmed
Page
Camp on
Call ID box and picture*
See PC Attendant Features in Section 2, Terminal
Units, above.
Cancel all messages (system)
Each attendant may cancel all system messages stored
at extensions assigned to that attendant position.
Class of Service reassignment
The attendant console can reprogram the day and night
Class of Service of any extension.
Clear alarm
The attendant may clear any system diagnostic alarms
from the attendant display at the press of a button.
Conference
An attendant can set up a conference of up to eight
parties, and then speak exclusively with one party in
the conference. The parties can be extensions or outside
lines.
Day alert
An attendant experiencing an unusual amount of call
traffic, or wishing to leave the attendant position
temporarily, may flexibly assign another station, the
day alert station, to receive attendant calls. Calls ring
the attendant and the day alert station simultaneously.
Dial continuation
Dial continuation overrides automatic hold and enables
the attendant to operate certain features such as dialing
to a Voice-Store-and-Forward (VSF) machine.
Direct station select
The attendant can access a station by pressing its direct
station select (DSS) button on the Attendant console
or on the DSS unit.
Distinctive recall
You can program each DID number to recall to a
specific attendant. The Avanti Attendant console display
shows the number of the DID line so that the attendant
knows which DID line is recalling.
Distinctive ring at attendant*
See Caller ID box and picture under PC Attendant
Features in Section 4, Terminal Units, above.
Display (attendant console)
The Avanti Attendant console is equipped with a graphic
display that provides Ten softkeys, time and date
information, and calling and called status display. Six
buttons on the display module indicate the status of
calls placed on private hold.
* Requires the PC Attendant option.