Specifications

61Digital Family Features
Call pickup
Calls to individual extensions may be retrieved by other
system users in several ways.
Direct: Retrieve a call ringing at a specific extension.
Group: Retrieve any call ringing within your
retrieval group, from your telephone, without having
to know which extension or outside line the call is
on.
On hold: Retrieve a call on hold at another extension
in the system.
One touch: With the press of one button, any
station can pick up incoming calls to any other
extension in the system.
Page: Retrieve a call announced through a page.
Call transfer
Calls may be transferred in several different ways,
depending on personal convenience and the location
of the call recipient.
Confirmed: Ensure the successful completion of
a transfer by remaining on the line to check that
the parties are connected.
Handsfree: Transfer an outside call to another
station using the handsfree audio path as a voice
call.
Page: Transfer an outside call using the paging
feature. The call can be retrieved by call pickup
page or meet-me page.
Screened: Ask the intended recipients of calls if
they wish to accept them, before completing the
transfer.
Unscreened: Transfer a call to another extension
and go onhook before the called extension answers.
The transferred call then rings or camps on to the
destination extension.
Camp on
Transfer a call to a busy extension. The system
automatically camps the call onto the called extension.
Camp on tone
Set the system to sound a tone at an extension where
a call has been camped on.
Conference
The DIGITAL systems support three types of
conferences: conference, conference loop and meet-
me conference. At any time there can be total of up to
30 conference participant system wide.
Conference - eight parties: Set up a conference
call with up to seven other internal or outside parties
by dialing each party and adding them to the
conference. All eight parties can participate in the
conversation.
Conference loop - 30 parties: Set up the conference
loop call with up to 30 pre-defined internal parties.
At the press of a single button, the DIGITAL
system will dial all of the conference parties. The
DIGITAL system supports up to ten loop
conferences held simultaneously, with a maximum
of 30 participants system-wide.
The system can be programmed for two-way
conference loop, so that all of the parties can listen
and speak, or for one-way conference loop, where
the mediator of the conference can speak and can
designate up to five other parties to speak. The
remaining parties are listening to the conversation.
By the press of a button, any listening parties can
alert the conference mediator of their desire to