Specifications

In addition, on Avanti 3025, Avanti 3020F, Avanti
3020H, Avanti 3015DF, Avanti 3015DH, and Avanti
3015H stations:
Handsfree: Initiate calls and talk handsfree, through
the high-quality built-in speakerphone, on internal,
local, long-distance, and international calls.
Voice activated speed dialing: A Voice Recognition
card is available for dialing based on an oral (voice)
command. From stations having this card, you can
perform voice activated speed dial. The telephone will
recognize your voice given instructions and dial the
number you request. For each station having a Voice
Recognition card, the user can record dialing instructions
and program up to 56 numbers to be dialed.
DSS Add-on unit: Attach up to four DSS Add-on
units (figure 2) to a station, to enable easy access to a
total of 120 extensions and speed dial numbers and to
provide extension Busy Lamp Field (BLF) indications.
Each DSS Add-on module has four map buttons and
30 programmable buttons for speed dial numbers and
BLF indication, so four sets of 30 speed dial numbers
can be programmed. With the DIGITAL KEY BX
system, up to eight button maps may be programmed.
With the DIGITAL 400 and DIGITAL 1000 systems,
up to 12 and 48 maps, respectively, may be
programmed. The each of these systems a maximum
of four maps may be assigned to each DSS.
Data interface: The optional Telrad APPLync data
card or the optional Telrad DATALync data card come
in a unit that snap on to the bottom of the stations for
use as a computer-telephony interface (see Data interface
cards, later in this section). With either of these data
cards, a PC may be connected to the telephones.
Software upgrades: When Telrad develops upgraded
software for the telephones, the new software can be
downloaded to the telephones from a remote sight or
from a PC connected to the MPD card in the system
cabinet, without touching the individual telephones.
14 Terminal Units
Figure 6 Avanti 3020F and 3020H display sets
Figure 7 Avanti 3025 graphic display set
Figure 8 Avanti 3000