Instruction manual

12/21/2010
22
Step 9
Remove screws from
opposite side (bottom)
Step 10
• Re-install bottom hinge assembly using
screws removed in Step 9.
• Put in the levelling rings from Step 8
Note: All parts needed for reverse door swing
assembly are included in the component
bag inside the unit along with the owner’s
manual and the key.
Step 11 Step 12
Remove screws from
opposite side (top)
• Reverse door 180° and re-install
• Re-
install top hinge assembly . Make
sure that the door is properly
aligned with the cabinet before
tightening the screws.
Procedure for reversing door opening