User's Manual

9
@
9
w
_
EN
.
book Page
33
Friday
,
June
22
,
2007
5:22
PM
Call Time
This menu allows you to view Last Call Time, Total
Sent and Total Received (displayed in hours, minutes,
seconds). You can select Reset All Time to reset all
the call timers.
Depending on your network
, rounding-off for
billing purposes, taxes etc, the actual time invoiced
for calls and services by your service provider may
vary.
Call Cost (Network dependent)
Last Call Cost
Displays the cost of the last call.
Total Cost
Displays the total cost of all calls since the cost
counter was last reset. If the total cost exceeds the
maximum cost set in the Max Cost option, you will
not be able to make any more calls until you reset
the counter.
Reset Cost
Reset the cost counter. You need to enter your PIN2
code and confirm.
Max Cost
Set the maximum cost of your calls (PIN2 code is
33
required).
Price Per Unit
Allows you to set the unit price for the call cost.
This unit price shall be used for calculating the cost
of your calls (PIN2 code is required).
SMS Counter
Displays the number of messages that have been
sent and received.
GPRS Counter
Tabulates the amount of data sent and received via
GPRS. You can also reset the counter. The unit of
measurement is Byte.
Call History