User's Manual

Calling 13
2. Select Conference Call from the call menu. The
two calls will be combined and a conference
call is established.
During the multi-party call, you can answer a new
incoming call or add a new member to the call by
dialing the new member (the ongoing multi-party
call will be put on hold automatically). Once the call
is established, select Establish conference call from
the call menu to add the new member to the multi-
party call (you can add up to five members).If you
wish to separate one member from the call, you can
select Split conference Call during the multi-party
call. To disconnect a member from the call, select
End call in conference.
Switch calls (Network dependent)
When you have one active call and one call on hold,
you can press left softkey
Options , then select Swap
calls
to switch between the 2 calls.
Call Handsfree
During a call, press left softkey Options and select
Handsfree .
When the headset is plugged into the phone, you
cannot activate handsfree mode.
Answer a call
Press ( to answer a call.
Reject a call
Press ) to reject a call.
Answer a second call (Network
dependent)
If you have activated Call waiting , you will be alerted
when there is a second incoming call. You can:
1. Press
( to answer the second call. The current
call will be put on hold automatically.
2. Press
) to reject the second call and continue
with your current call.
3. When there is one active call and one call on
hold, you can press
L Options to carry out the
following operations:
If you press the numeric keys, the notepad editor
will opened under call waiting mode.
• Handsfree • BT headset • Mute
• Scratchpad • End call • Swap calls
• End all calls
Philips XNRG_Master_EN.book Page 13 Thursday, November 15, 2007 4:59 PM