User's Manual

Getting Started 9
You need to open the battery cover with the
decoration piece provided and then insert an AAA
battery as shown below.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is
fully charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time and stand-by time can go up to 10 hours* and
1 month* respectively. The dry battery (when fully
charged) can provide you with an extra 2 hours and
300 hrs of talk time and stand-by time respectively.
The phone supports Alkaline, Lithium and
rechargeable Nickel Metal Hydride (NiMH)
batteries regardless of the brand.
*Depending on the network conditions, user
settings, method of use, etc the actual results may
differ.
The scrolling icons of the dry battery level
indicator displays the status of charging only when
you use a rechargeable dry battery.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage
the battery. The only way to turn off the charger is
to unplug it, so it is advisable to use an easily
accessible AC power socket.
If you do not intend to use your phone for several
days, we recommend that you remove the battery.
You can use the phone while it is charging (note
that the vibra alert goes off when the charger is
connected). If the battery is completely flat, the
battery icon will only reappear after a few minutes
of charging.
Philips XNRG_Master_EN.book Page 9 Thursday, November 15, 2007 4:59 PM