User's Manual

Getting Started 8
Switching on the phone
To switch on the phone, long-press the ) key.
Enter the PIN code if required. A PIN code is a 4- to
8-digit secret code for your SIM card. It is
preconfigured and communicated to you by your
operator or retailer. For more information on PIN
codes, see “Security” on page 54.
If you enter an incorrect PIN code three times,
your SIM card will be blocked. To unblock it, you
must request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked to
customize your phone. This function will help you
to set the following parameters:
Charging the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert
will warn you when the battery reaches low, if the
battery alert is On. (see “Sounds alerts” on page 59)
Once the battery and battery cover are back in place
you can charge the phone. Plug in the connector as
shown below. Then plug the other end into a main
AC power socket.
The battery symbol indicates the state of charge. During
charging, the charge indicators will scroll; it takes
around 2.5 hours to fully recharge your mobile phone.
When all the scroll bars are steady the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time goes up to 8.5 hours and stand-by time up to 850
hours.
Summer time
Set time
Set date
Melody for incoming calls
Wallpaper
Address Book