User's Manual

Settings 59
1. In the list, select a key from 2 to 9 and
press
,. If the key was already programmed,
select Change.
2. Browse the list to select the function you wish
to associate with this key and press
, or L
Select. If you select Flash dial, you will be asked
to select a contact in the contacts list.
3. To use a hotkey, press and hold the
programmed key when in idle mode.
Voice command
Allows you to set up a direct access to a specific
function by linking it to a voice tag.
You can associate a voice command to most
functions supported by the hotkeys.
1. Select <New>, then browse the list to select a
function and press
, or L Select.
2. When Press
, and speak appears, record your
voice tag. Make sure you are in a quiet
environment, choose a short and simple word
and clearly pronounce it.
3. The next menu gives you access to Delete, Play,
function and Change sound options. Press
R
Back to create another voice tag.
To use the voice command, press and hold
, when
in idle mode, then say the recorded voice tag.
To reprogram a voice command: select it, press
L
OK and select Change function. This will bring you to
the list of available functions.
Voice dial
Allows you to set a voice tag that will dial the
default number for the corresponding contact
simply by saying the voice tag. To set up voice dial,
proceed as follows:
1. Select <New>, then a contact in the list, then
press
, or L Options.
When the phonebook in phone is selected, choose
the number of your choice in the list that is
displayed.
2. When Add voice tag? appears, follow the
instructions displayed on the screen.
To use the voice dial, press and hold
, when in idle
mode, then say the voice tag corresponding to the
number you want to dial.
Up to 15 voice tags can be defined and shared
between voice dial and voice command. Recorded
voice tags are available in their respective menu
and can be deleted, played or changed.