User's Manual

56 Settings
Screen saver
Allows you to set the Screen saver On or Off. When
On, it will run a slide show in idle mode, by using the
jpeg file(s) you have stored in your phone and
selected.
Settings the Screen saver Off automatically
activates the Economy mode, i.e., the current time
displayed on a white background. This mode
increases the autonomy of your phone (increases
your battery life).
1. When setting the Screen saver On, select a
picture in the list that appears by pressing
< or
> (you deselect it also by pressing these keys),
then press
- to move to the next picture.
2. Once you selected the pictures of your choice,
press
, to activate the screen saver.
You must select several pictures (up to 10) in order
to display a slide show. When selecting only one
picture to be used as a screen saver, only this
picture will be displayed.
3. Select Start delay and press
+ or - to choose a
value. When in idle mode, the screen saver
will start according to the time limit you have
set.
4. Then select the Display period and press
,.
The timing you have set will be applied
between each picture of the slideshow.
Backlight
Backlight is activated when receiving incoming
calls or messages, browsing menus, etc. Select one
of the available values.
Backlight intensity
Allows you to choose from different levels of
backlight intensity.
Network
Contact your phone operator to have full
information about GPRS availability over
its network and for an appropriate
subscription. You might also need to configure your
phone with the GPRS settings supplied by your
operator, by using the menus described in this
section. Then select the bearer (GSM or GPRS) in
the menus of each application to be used (e.g. WAP,
MMS, e-mail, etc.).
Access settings
This menu allows you to create different data
profiles that can be used for connecting to various
services: for example, when using WAP or when