User's Manual

Extras 22
Position of devices
Before transmitting data between two devices, they
must be correctly positioned in relation to one
another. Make sure that:
• the infrared ports are facing each other,
• they are at a less than 50 cm away from each
other.
• nothing obstructs the infrared beam.
Sending data
To send data via infrared from your mobile phone,
you must first select the item to be sent: when
selecting a picture, a sound, a name or an event, a
sub-menu then gives you access to the Send via
infrared option.
As soon as your phone finds another infrared
compliant device to communicate with, the sending
automatically takes place. Messages are displayed
on the screen for you to follow the process.
Sending is cancelled if your phone cannot find
another device before the time out is reached, if the
infrared link is broken, or if you cancel the
process.
Receiving data
When you select Receive your phone is ready to
receive an item via infrared and waits for the
another infrared device to send it. As with sending
data, messages are displayed on the screen and
allow you to follow the process.
Receiving is cancelled if your phone isn’t
contacted by another device before the time out is
reached, if the infrared link is broken, if the size of
the file sent is too large or if you cancel the
process.
Saving the data
A message will appear to inform you that you have
received a file. Press
, to access the options
described below.
Bluetooth
Your phone supports Bluetooth wireless
technology, allowing connection to a compatible
Bluetooth device within 10 meters. The Bluetooth
connection can be subject to interference from
obstructions such as walls or other electronic
devices.
Save To save the data, eventually rename
the file.
Show To display the details of the data you
have received.
Discard To ignore the data received.