Manual

F. Photo of the evaporator coil once the evaporator fan motor and drain pan have been removed.
(Freezer Models Only)
G. In order to replace the defrost heater and temperature sensor, the control panel must also be
disassembled. Once disassembled, cue the metal pins used to mount the defrost heater. Disconnect the cable
connector and replacethe defrost heater.
Please note: You will want to re-mount the defrost heater after installation.
(Freezer Models Only)
H. Remove the screws located on each side of the evaporator coil in order to replace.
I. To reassemble the evaporator components, complete the steps in the reverse order.
32