User Manual

- 15 -
User Manual
13. Reattach the water pumps tube and replace the included clamp to secure.
. Place the water pump into its original position and replace the 5 screws.
14. Plug in the machine and turn it on. Hold the Clean button until CLE shows on the screen. Pour your
cleaning solution into the water trough and then while CLE is blinking on the display, press the Clean Button
again to initiate the cleaning function. When finished drain the cleaning solution from the water trough.
15. Repeat this process using a solution of sanitizer and water according to your ice machine sanitizer
instructions. Drain the sanitizer solution and then dry off the ice bin.
16. Reinstall the door, back plate, and roof in that order. Turn on the ice machine and throw out the first
batch of ice to prevent residual cleaner or sanitizer.
17. Remove air filter and clean excess dust and dirt, reinstall air filter."