User Manual

- 13 -
User Manual
Cleaning Process
Items you need
· Screwdriver or drill
· Scissors and zip ties
· Spray bottle
· Measuring cup
1. Turn off and unplug the machine from the power source.
2. Remove the screw’s holding on the roof of the machine in the back and remove to roof by sliding it backwards
and then up. Set aside.
3. Then, remove the 6 screw’s holding in the back plate and remove. Set aside.
4. Open the front door to the ice bin. Because the roof in now removed you will be able to slide the door up and
out of its tracks.
5. Remove the water curtain by lifting on the two plastic hooks holding it in place. Place the water curtain in the
soaking tub.
6. Then, reach into the water trough (opening left by the water curtain removal) and pull the spray rack up and
then out. Unlatch the water tube and remove the spay rack. Place the spray rack in the soaking tub.
7. Remove the four screws holding the connecting bar on the back end of the top of the unit and remove this bar.
· Soaking tub
· Scrubbing brushes
· Draining pump