Installation Sheet

Page 20
WALK-IN TUB MANUAL
OPERATING INSTRUCTIONS
5701 NW 35 Avenue Miami, FL 33142 • Phone [phone] • Fax [phone]
NANO2 BUBBLES (PUMP)
Used to turn the micro-bubbles ON and OFF. Note: Activating
NANO
2 BUBBLES will turn off hydro jets, automatically.
HYDRO CONTROL (PUMP)
Used to turn the water jets ON and OFF.
AIR CONTROL (BLOWER)
Used to turn the air jets ON and OFF.
CHROMATHERAPY LIGHT
PRESS ONCE (when light is OFF) - Turns light ON in Auto-
Cycle Mode which will slowly transition from color to color.
PRESS TWICE (when light is ON)- Turns on static, non-
changin
g color mode. Continue to press twice to move on to
the next color until you find your desired choice.
PRESS ONCE (when light is ON) - Turns off light. Resets cycle
after 2 second pause.
HYDRO JET FLOW CONTROL
Used to increase or decrease air pressure flowing through the
water jets.
FOR TUBS WITH NANO2 BUBBLES OPTION.
FOR TUBS WITH WATER JET OPTION.
FOR TUBS WITH AIR JET OPTION.
FOR TUBS WITH CHROMATHERAPY LIGHT OPTION.
FOR TUBS WIT
H WATER JET OPTION.
FOR TUBS WITH AUTO DRAIN OPTION. FOR TUBS WITH AROMATHERAPY OPTION. FOR TUBS WITH HEATED BACKREST OPTION.
AUTO DRAIN DIVERTER
While the HDYRO PUMP is running, use
this diverter to channel the pumped water
through the HYDRO JETS or down the drain.
AROMATHERAPY CAP
Unscrew cap and insert your favorite
fragrance beads to bathe in a soothing
aroma scent.
HEATED BACKREST
Used to turn heated pads ON and OFF. Will
turn off after 20 minutes. Note: Light may
blink for 2 seconds and turn off. This just
indicates system is initiating. Simply press
the button again to activate heating pads.
1
2
3
4
5
TUB CONTROLS
OPERATING INSTRUCTIONS
5
4
3
2
1