Handheld videoscope CT series
Safety Recommendations DANGER This device must not be used for medical or veterinary purposes. Do not use this item in explosive atmospheres. Do not look into distal end with naked eyes, eyesight maybe harmed by strong light. WARNING Keep the device out of reach of children. Do not try to modify or disassemble the unit. Do not pull hard or twist the insertion tube. Serious impact may bring breakage of lens components at distal end .
Parts Function 12 11 10 13 03 02 01 04 05 06 09 07 08 01 Downward Key 06 Brightness 10 Micro SD Slot 02 Power On/Off 07 Snap 11 Reset 03 Upward Key 08 Control wheel 12 5V DC Jack 04 O K 09 Lock knob 13 Status Indicator 05 MENU 02
Quick Setup 1.Detachable Panel Take apart : Set Sliding key to outside with finger, then push forwards the panel which will be taken apart from main body. Fig01. Sliding key Main body Fig01. Combine together: align connectors between panel and main body closely, then slide the panel backwards, with a crack, the panel will be fixed on main body securely. Fig02. Fig02. 2.Ready for use At shutdown status, plug in Micro SD in direction. Fig03 Fig03.
Long press button , the status indicator turns green, the device enters preview mode,real time image shows on the screen and at he same time, some icons and time information will be seen at top location. Fig04 2020/06/04 15:53:03 Fig04 Through button to adjust illumination, steer the control wheel to make distal end bending. Locking knob is used to tighten or release the control wheel in order to fix distal end at a certain angle. F ig05. Fig05 NOTE Definition Press: press and release less than 1sec.
Loop Record Video files consist of consecutive clips with the same duration, the duration is optional : Permanent 1 minute 3 minutes 5 minutes Permanent means the whole video is to be recorded as a single clip. NOTE Sound Recording Under this item, to select open, the surrounding sound and video will be recorded simultaneously. At the same time, the icon on the top of screen is changed from to . The function also can be activated by shortcut key . Date and Time Using Fig 06.
Default setting and Version By the two items, you can get to factory setting and see current software version. WIFI Select On or Off to choose the WIFI function to be activated or not, the icon on the top of screen will turn to that indicates the WIFI is active. Scan QR code on the screen to load down APP onto your smart phone , you can also search RoadCam in android or apple store to get the APP.
Press OK to play video, press OK again to pause, press OK once more return to play. Press speed. to fast-forward, to back-forward, repeatedly press the key to get 2x 4x 8x Delete files When you find targeted picture or video, press MENU to delete files, press OK to choose delete current single one or all files. Long press MENU, jump to preview mode. Storage & Maintenance 1.
Cleaning unit body Wipe with soft cloth dampened with clean water,and wipe with clear and dry cloth. 3. Storage precautions Store the instrument under normal room temperature and humidity. Straighten angulation section while lay into carrying case. Store the equipment at a clear,dry and stable place. Q & A Q: No image on the screen after turning the power on A: Battery is exhausted. connect the panel to the power adapter and recharging .
Supplementary Fiber illumination On some devices, you can find an external radiator, Fig10. which is used to dissipate heat produced by built-in 6 Watt light source, the light is conducted to camera end by glass fiber. Be cautious not to touch the radiator, or the hot surface may hurt your finger. WARNING Radiator Fig 10 High temperature videoscope Devices equipped with cooling system allow probe portion(camera and distal insertion tube) working at high temperature condition, up to 250 centigrades.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
