Instruction Manual

1. Remove the container from the base.
2. Thoroughly clean the container using water, sponge and a dish soap
such as Noble Chemical Sunbright (147SUNBRIGHT). Rinse the container in water.
3. Sanizetheoutsideofthecontainerandthebasewithasocloth
andasanizingsoluonsuchasNobleChemicalQuikSan(147QUIKSAN).
4. FillcontainerwithsanizingsoluonsuchasNobleChemicalSani-512(147SANI512).
Place the container on top of the base and secure the lid. Turn the blender on to high
speedtoallowthesanizingsoluontoworkitswayintothebladeassemblyand
aroundthejar.Dumpthesoluonintoasinkandallowthecontainertoairdry.
5. Allowthelidtosoakinthesanizingsoluonforatleast2minutes,
and then allow it to air dry.
6. Ensure all parts of the blender are dried thoroughly before the next use.
CLEANING & SANITIZING
REPLACEMENT PARTS
5.
Wash, rinse, sanize and dry the container prior to inial use. Blender containers should
be cleaned aer EVERY use to prevent residue build-up around the blade assembly.
PART NAME REPLACEMENT PART ITEM #
Blade Assembly 928PBA1
Drive Coupling 928PDC1
Blender Jar Pad 928PJARPAD
Blender Jar - 64 oz. 928BLJAR64P
Blender Jar - 48 oz. 928BLJAR48P
Blender Jar Lid 928PLID1
Motor - 120V, 1500W 928PMTR1500
Locknut 928PBLOCK2