Instruction Manual

928BL2T48, 928BL2T64
Toggle Controls
OPERATION
INSTRUCTIONS
2.
1. Ensuretheblenderisintheoposion
and place the container on the blender
base. Make sure the blender is fully seated
so that the drive coupling is in contact
with the container and the base.
Plug the blender into a 120V outlet.
2. Put the ingredients into the container and
place the lid on. Push the lid down as far
as it can go on to the container.
3. Speed Sengs: This blender has 2 speed
 sengs-HighandLow.Usethetoggle
switch to select the desired speed and the
blender will begin working. Use the High
 opontocrushicequickly.
4. Pulse: This blender is also equipped with
a pulse feature, which is engaged by
holdingdownthe“Pulse”buon.The
blenderwillrunonhighspeedunlthe
buonisreleased.Itwillthenreturnto
thecurrentspeedseng.
5. Always allow the motor to stop
completely before adding or removing the
container from the base. Not following
this warning could cause damage to the
blender which may void the warranty if
it is deemed misuse is the cause of the
malfuncons.
6. Do not operate the blender without a lid.
7. Always hold the blender container
with one hand by the top of the lid to
ensure the container remains secure
atop the base.
8. Washanddrythecontaineraer
each use.