Commercial Blenders Digital Controls Toggle Controls with Timer 928BL2T48, 928BL2T64 928BL2E, 928BL2E48 Variable Speed Keypad Controls 928BL2VS, 928BL2VS48 928BL2K48, 928BL2K64 04/2022
SAFETY 1. READ AND SAVE ALL INSTRUCTIONS. 2. Do not immerse the blender in water or other liquid. Doing so can result in electrical shock. 3. Always unplug from outlet prior to handling or cleaning. 4. Avoid contact with moving parts while operating the blender. 5. CAUTION: Blades are sharp. Handle carefully. 6. This blender is not intended for use by children or individuals with impaired mental and/or motor skills. Individuals who lack experience operating a blender need supervision during use. 7.
OPERATION INSTRUCTIONS 928BL2T48, 928BL2T64 Toggle Controls 1. Ensure the blender is in the off position and place the container on the blender base. Make sure the blender is fully seated so that the drive coupling is in contact with the container and the base. Plug the blender into a 120V outlet. 2. Put the ingredients into the container and place the lid on. Push the lid down as far as it can go on to the container. 3. Speed Settings: This blender has 2 speed settings- High and Low.
OPERATION INSTRUCTIONS 928BL2VS, 928BL2VS48 Variable Speed Controls 1. Ensure the blender is in the off position and place the container on the blender base. Make sure the blender is fully seated so that the drive coupling is in contact with the container and the base. Plug the blender into a 120V outlet. 2. Put the ingredients into the container and place the lid on. Push the lid down as far as it can go on to the container. 3. Speed Settings: This blender has adjustable speed settings using a dial knob.
OPERATION INSTRUCTIONS 928BL2E, 928BL2E48 Digital Controls with Timer 1. Ensure the blender is in the off position and place the container on the blender base. Make sure the blender is fully seated so that the drive coupling is in contact with the container and the base. Plug the blender into a 120V outlet. 2. Put the ingredients into the container and place the lid on. Push the lid down as far as it can go on to the container. 3.
OPERATION INSTRUCTIONS 928BL2K48, 928BL2K64 Keypad Controls 1. Ensure the blender is in the off position and place the container on the blender base. Make sure the blender is fully seated so that the drive coupling is in contact with the container and the base. Plug the blender into a 120V outlet. 6. One Touch Start: This feature allows you to use the most recent blending settings without having to re-program them.
CLEANING & SANITIZING Wash, rinse, sanitize and dry the container prior to initial use. Blender containers should be cleaned after EVERY use to prevent residue build-up around the blade assembly. 1. Remove the container from the base. 2. Thoroughly clean the container using water, sponge and a dish soap such as Noble Chemical Sunbright (147SUNBRIGHT). Rinse the container in water. 3.
EQUIPMENT LIMITED WARRANTY AvaMix warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by AvaMix covering your AvaMix brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment. Only the equipment’s original purchaser may make a claim under this warranty. AvaMix reserves the right to approve or deny the repair or replacement of any part or repair request.
