RITY122 12.1” XGA Flat Touch Panel PC Intel® Atom™ Processor with Intel® Valleyview SoC Quick Reference Guide 1st Ed – 26 March 2015 Copyright Notice Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
RITY122 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Content 1. Getting Started ........................................................................................................ 4 1.1 1.2 1.3 1.4 Safety Precautions .................................................................................................... 4 Packing List ............................................................................................................... 4 System Specifications ..................................................................
RITY122 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications Panel LCD size Display Type Resolution Color Luminance 12.1", 4:3 XGA 1024 x 768 16.2M 600cd/m² Contrast ratio 700 Viewing angle 80(H) x 70(V) Response time 8 ms Backlight LED Touch Type 5 Wires resistive /PCT Touch Light Transmission RES 75 % / PCT 90% Touch Controller Onboard USB touch (PenMount) / USB touch (EETI) System SBC Processor ACP-BYTPOS Intel® Atom™ E3845 4-Core 1.
RITY122 Audio Chipset Realtek ALC892 supports 2-CH Audio Interface Line-Out Speaker Output 2 x 2W Ethernet Chipset 2 x Realtek 8111E Ethernet Interface 10/100/1000 Base-Tx GbE compatible LAN Port 2 x RJ-45 Power Requirement Power Connector minidin 4P for DC in w/ lock type Power Requirement Power Type +19V ~ +24V AT/ATX (ATX is default setting) Input: 100 ~ 240Vac/ 50 ~ 60Hz Adapter Output: 90W Adapter (24V @ 3.
Quick Reference Guide VCCI OS Information Win 8, Win 7, POS Ready, Linux Note: Specifications are subject to change without notice.
RITY122 1.4 System Overview 1.4.1 Right View USB 1.4.2 Bottom View Connectors Label Function COM1/2/3 External Serial Port 1/2 connector (For RS-232/422/485) DB-9 male connector External Serial Port 3 connector (For RS-232) Audio Line-out audio jack C/D Cash Drawer connector USB 3 x USB 3.0 connector 3 x USB 2.
Quick Reference Guide 1.
RITY122 2. Hardware Configuration Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.1 RITY122 connector mapping 2.1.
RITY122 2.1.
Quick Reference Guide 2.1.
RITY122 2.2 Installing Hard Disk & Memory Step 1. Memory Installation: Unfasten 2 screws from the case. Then take off the top chassis. Step 2. Insert the SODIMM into the memory socket.
Quick Reference Guide Step 3. HDD Installation: Unfasten 2 screws from the case. Then take off the top chassis. Step 4. Insert the HDD into the bracket and fasten 4 screws. Step 5. Re-assemble your system back through previous steps to complete the installation.
