MX1900J Intel® Quad Core Bay Trail 4th gen Atom™ Mini ITX Motherboard Quick Installation Guide 1st Ed – 18 March 2015 Part No.
MX1900J Quick Installation Guide FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Installation Guide these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
MX1900J Quick Installation Guide Content 1. Getting Started ............................................................................................................ 5 1.1 Safety Precautions .................................................................................................... 5 1.2 Packing List ............................................................................................................... 5 2. Hardware Configuration .........................................................
Quick Installation Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
MX1900J Quick Installation Guide 2.
Quick Installation Guide 2.1 Product Overview 2.1.
MX1900J Quick Installation Guide 2.1.
Quick Installation Guide 2.2 Setting Jumpers & Connectors 2.2.1 ATX Power connector (ATX12V1) Note: This header doesn’t need to be connected to an ATX power supply if a 12V DC adapter is connected to “DC1” connector. 2.2.
MX1900J Quick Installation Guide 2.2.3 Clear CMOS Jumper (CLCMOS1) 2.2.
Quick Installation Guide 2.2.5 Fan connector (CPU_FAN1, SYS_FAN1) CPU_FAN1 SYS_FAN1 2.2.
MX1900J Quick Installation Guide 2.2.7 COM1 Ring-In/ +12V/ +5V Select (JCOMPWR1) 2.2.
Quick Installation Guide 2.2.9 SATA 3.0 Ports (SATA1, SATA2) Note: Due to “SATA2” and “MINI_CARD1 (mSATA)” are sharing the same SATA channel, only either one of them can be used. Please DO NOT install devices to these two headers at the same time. 2.2.
MX1900J Quick Installation Guide 2.2.11 mSATA Mode Select (JSATA1) Note: Remove this jumper only when there is trouble for BIOS to detect the installed mSATA device on connector “MINI_CARD1”. 2.2.12 Front USB2.
Quick Installation Guide 2.2.13 Front Panel Audio connector (AAFP1) 2.2.
MX1900J Quick Installation Guide 2.2.15 Digital I/O connector (JDIO1) 2.2.
Quick Installation Guide 2.2.
MX1900J Quick Installation Guide 3.
Quick Installation Guide Unit: mm MX1900J Quick Installation Guide 19
MX1900J Quick Installation Guide Unit: mm 20 MX1900J Quick Installation Guide
