EPI-QM67 Intel® Huron River QM67 EPIC Module with Intel® QM67 Chipset User’s manual 3rd Ed – 9 January 2013 Copyright Notice Copyright 2013 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EPI-QM67 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
EPI-QM67 If you still cannot find the answer, gather all the information or questions that apply to your problem, and with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the support you need to get the most from your Avalue’s products. In fact, most problems reported are minor and are able to be easily solved over the phone. In addition, free technical support is available from Avalue’s engineers every business day.
User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
EPI-QM67 Content 1. Getting Started ........................................................................................................... 9 1.1 Safety Precautions ................................................................................................ 9 1.2 Packing List ........................................................................................................... 9 1.3 Document Amendment History ............................................................................ 10 1.
2.5 User’s Manual Installing the CPU ................................................................................................ 34 2.5.1 Locate the CPU socket on the board. ...................................................................................... 34 2.5.2 Separate CPU cooler and its base first by screw drawer ........................................................ 35 3. BIOS Setup ......................................................................................................
EPI-QM67 3.6.3.1.3 Memory Configuration ..................................................................................... 66 3.6.3.1.4 Memory Thermal Configuration ....................................................................... 68 3.6.3.1.5 GT – Power management Control ................................................................... 69 3.6.3.2 PCH-IO Configuration ...................................................................................... 69 3.6.4 Boot....................
User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
EPI-QM67 1.
User’s Manual 1.4 Manual Objectives This manual describes in detail the Avalue Technology EPI-QM67 Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with EPI-QM67 series or change the standard configurations.
EPI-QM67 1.5 System Specifications System CPU Intel Sandy Bridge Processor (35W~45W CPU) BIOS AMI 8M-bit SPI BIOS System Chipset I/O Chip System Memory SSD Watchdog Timer H/W Status Monitor Expansion Intel Cougar Point-Mbl (QM67) Nuvoton NTC6776F One 204-pin DDR3 SODIMM socket, supports up to 8GB DDR3 1066/1333 SDRAM 1 x mSATA (from mini-PCIe slot) Reset: 1 sec.~65535 sec./min. and 1 sec. or 1 min./step Monitoring system temperature, voltage.
User’s Manual Ethernet LAN Chip 1 x Intel 82574L 1 x Intel 82579 Gigabit PHY Ethernet Interface 1000 Base-Tx Gigabit Ethernet compatible Mechanical & Environmental Power Requirement +12V~19V ACPI Power Type Operating Temp. Single power ATX Support S0, S3, S4, S5 ACPI 1.0b and 2.
EPI-QM67 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of EPI-QM67.
User’s Manual 2.
EPI-QM67 2.
User’s Manual EPI-QM67 User’s Manual 17
EPI-QM67 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change CMOS settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
User’s Manual 2.2.1 Main Memory EPI-QM67 provides one 204-pin DDR3 SODIMM socket, supports up to 8GB DDR3 1066/1333 SDRAM. SODIMM (Rear side) Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. Locate the SODIMM socket on the board. Hold two edges of the SODIMM module carefully. Keep away of touching its connectors. Align the notch key on the module with the rib on the slot.
EPI-QM67 Mounting Notch Notch Key Ejector Tab 204-pin DDR3 SODIMM To remove the SODIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the SODIMM module. Note: (1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase your system’s performance without acquiring technical information in advance. (2) Static electricity can damage the electronic components of the computer or optional boards.
User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
EPI-QM67 Connectors Label Function Note BAT1 Battery connector 2 x 1 wafer, pitch 1.25mm CN1 Audio out connector Audio jack CN2 DVI connector CN4 204-pin DDR3 SODIMM CPU_FAN1 CPU Fan connector HDMI HDMI connector HD_PWR1 HD power connector 4 x 1 wafer, pitch 2.50mm J422/1 Serial port 2 in RS-422/485 mode 3 x 2 header, pitch 2.0mm JAUDIO1 Audio Connector 6 x 2 header, pitch 2.0mm JBKL1 LCD Inverter connector 1 5 x 1 wafer, pitch 2.
User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT1) Protect* Clear CMOS *Default 2.4.
EPI-QM67 2.4.3 AT/ATX mode selector, Front panel & LED settings (JFP1) AT* ATX *Default Signal PIN PWBT 1, 2 RST# 3, 4 PWR-LED 5, 6 HDD-LED 7, 8 Short: AT MODE Open: ATX MODE COPEN# 2.4.
User’s Manual 2.4.5 Battery connector (BAT1) 2.4.6 Signal PIN GND 2 VBAT 1 Audio connector (JAUDIO1) Signal PIN PIN Signal GND 12 11 MIC1_JD LINE1_JD 10 9 FRONT_JD MIC_LIN 8 7 MIC_RIN LINE_LIN 6 5 LINE_RIN GND 4 3 GND LOUT 2 1 ROUT 2.4.6.
EPI-QM67 2.4.7 CPU fan / System fan connector (CPU_FAN1/ SYS_FAN1) CPU_FAN SYS_FAN1 SYS_FAN CPU_FAN1 2.4.
User’s Manual 2.4.9 Serial port 1/ 2 connector (JCOM1/ JCOM2) JCOM1/JCOM2 2.4.10 Signal PIN IN Signal NC 20 19 RI2 CTS2 18 17 RST2 DSR2 16 15 GND DTR2 14 13 TXD2 RXD2 12 11 DCD2 NC 10 9 RI1 CTS1 8 7 RST1 DSR1 6 5 GND DTR1 4 3 TXD1 RXD1 2 1 DCD1 Serial port 1/2 in RS-422/485 mode connector (J422/1) Signal PIN PIN Signal GND 6 5 +5V RX+ 4 3 TX+ RX- 2 1 TX- Note: J422/1 is available after modifying the mode of COM2 in BIOS setting.
EPI-QM67 2.4.11 2.4.12 HD power connector (HD_PWR1) Signal PIN +5V 4 +5V 3 GND 2 GND 1 LCD Inverter Connector 1 (JBKL1) JBKL1 Signal PIN +5V 5 BRIGHT 4 BLK_ON 3 GND 2 +12V 1 2.3.12.1 Signal Description – LCD Inverter Connector (JBKL1) Signal Signal Description BRIGHT Vadj = 0.75V ~ 4.25V (Recommended: 4.
User’s Manual 2.4.13 2.4.
EPI-QM67 2.4.15 2.4.
User’s Manual 2.4.
EPI-QM67 2.4.18 General purpose I/O connector (JDIO1) Signal 2.4.
User’s Manual 2.4.20 SPI connector (JSPI1) Signal 2.4.21 PIN PIN Signal 7 HOLD# SPI_SI 6 5 SPI_SO SPI_CLK 4 3 SPI_CS#0 GND 2 1 +3.3V USB connector 4&5/ 6&7/ 8&9 (JUSB1_1/ JUSB1_2/ JUSB1_3) JUSB1_3 JUSB1_2 JUSB1_1 Signal PIN PIN Signal +5V 1 2 GND USB_DN4/6/8 3 4 GND USB_DP4/6/8 5 6 USB_DP5/7/9 GND 7 8 USB_DN5/7/9 GND 9 10 +5V Note: Wrong USB cable configuration with USB devices might damage USB devices.
EPI-QM67 2.5 Installing the CPU 2.5.1 Locate the CPU socket on the board. Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left.
User’s Manual 2.5.2 Separate CPU cooler and its base first by screw drawer 1.
EPI-QM67 2. turn the CPU lock clockwise to lock CPU The CPU fits in only one correct orientation.
User’s Manual 3.
EPI-QM67 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it.
User’s Manual 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
EPI-QM67 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the CMOS settings which resets your system to its defaults.
User’s Manual 3.6 BIOS setup Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 System Language This option allows choosing the system default language. 3.6.
EPI-QM67 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.1 PCI subsystem Settings Item Options PCI ROM Priority Legacy ROM, EFI Compatible ROM 42 EPI-QM67 User’s Manual Description In case of multiple Optional ROMs (Legacy and EFI Compatible), specifies what PCI Option ROM to launch.
User’s Manual PCI Latency Timer 32 PCI Bus Clocks, 64 PCI Bus Clocks, 96 PCI Bus Clocks, 128 PCI Bus Clocks, 160 PCI Bus Clocks, 192 PCI Bus Clocks, 224 PCI Bus Clocks, 248 PCI Bus Clocks VGA Palette Snoop PERR# Generation SERR# Generation Relaxed Ordering Enabled, Disabled Extended Tag No Snoop Maximum Payload Maximum Read Request ASPM Support Extended Synch Auto 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, 4096 Bytes Auto 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, 4096
EPI-QM67 3.6.2.2 ACPI Settings You can use this item to set up ACPI Configuration. Item Options Enable ACPI Auto Configuration Enable Hibernation Disabled, Enabled ACPI Sleep State Suspend Disable, S1 (CUP Stop Clock), S3 (Suspend to RAM) Lock Legacy Resources Deep S5 Disabled, Enabled 44 EPI-QM67 User’s Manual Description Enables or Disables BIOS ACPI Auto Configuration. Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS.
User’s Manual 3.6.2.3 Trusted Computing Item TPM SUPPORT Current TPM Status Information Options Description Disabled, Enables or Disables TPM support. O.S will not Enabled show TPM. Reset of platform is required. Displays the TPM status information [No TPM Hardware] 3.6.2.4 S5 RTC Wake settings . Item Options Wake system with Fixed Time Wake system with Dynamic Time Disabled, Enabled Description Enables or disables system wake on alarm event.
EPI-QM67 3.6.2.5 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
User’s Manual 3.6.2.6 SATA Configuration It allows you to select the operation mode for SATA controller. Item SATA Controller(s) SATA Mode Selection SATA Test Mode Options Enabled Disabled IDE AHCI RAID Enabled Disabled Description Enables or Disables SATA Device Determines how SATA controller (s) operate Enables or Disables Test Mode 3.6.2.
EPI-QM67 Item Options Critical Trip Point POR 15/23/31/39/47/55/63/71/ 79/87/95/103/111/119C Active Trip Point Hi Fan Speed Disabled 15/23/31/39/47/55/63/71/ 79/87/95/103/111/119C Active Trip Point 0 Fan Speed 0 ~ 100 Active Trip Point Lo Fan Speed Disabled 15/23/31/39/47/55/63/71/ 79/87/95/103/111/119C Active Trip Point 1 Fan Speed 0 ~ 100 Passive Trip Point Disabled 15/23/31/39/47/55/63/71/ 79/87/95/103/111/119C Passive TC1 / TC2 Value 1-16 Passive TSP Value 2 ~ 32 ME SMBus Thermal Repo
User’s Manual DIMM1/2/3/4 TS READ PCH Thermal Device MCH Temp Read PCH Temp Read CPU Energy Read CPU Temp Read Alert Enable Lock PCH Alert DIMM Alert PCH Hot Level Select DIMM1/2/3/4 Thermal Sensor Read Enable Enable or Disable PCH Thermal Device (D31:F6) MCH Temperature Read Enable PCH Temperature Read Enable Disabled, CPU Energy Read Enable Enabled CPU Temperature Read Enable Lock all Alert Enable settings PCH Alert pin enable DIMM Alert pin enable PCHHOT#: this signal is used to indicate a PCH temperatu
EPI-QM67 3.6.2.
User’s Manual 3.6.2.10 Intel Anti-Theft Technology Configuration Item Intel Anti-Theft Technology Options Enabled Disabled Intel Anti-Theft Technology Recovery 1 ~ 64 Enter Intel AT Suspend Mode Enabled Disabled Description Enable/Disable Intel AT in BIOS for testing only Set the number of times Recovery attempts will be allowed Request that platform to enter Intel AT Mode 3.6.2.
EPI-QM67 Item Intel AMT Intel AMT Setup Prompt BIOS Hotkey Pressed MEBx Selection Screen Verbose MEBx Output Hide Un-configure ME Configuration MEBx Debug Message Output Un-configure ME Intel AMT Password Write Enable AMT Wait time ASF Active Remote Assistance Process USB Configure PET progress Intel AMT SPI Protected WatchDog Timer Options Description Enable/Disable Intel ® Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled.
User’s Manual Item USB Device Legacy USB Support EHCI Hand-off USB transfer time-out Device reset time-out Device Power-up delay Mass Storage Devices Options Description Display how many devices are connected. Enables Legacy USB support. AUTO option Enabled disables legacy support if no USB devices are Disabled connected. DISABLE option will keep USB Auto devices available only for EFI applications. This is a workaround for OSes without EHCI Disabled hand-off support.
EPI-QM67 3.6.2.13 Super IO Configuration You can use this item to set up or change the Super IO configuration for FDD controllers, parallel ports and serial ports. Please refer to 3.5.2.13.1 and 3.5.2.13.2 for more information.
User’s Manual 3.6.2.13.1 Serial Port 0 Configuration Item Serial Port Device Settings Change Settings UART 232 422 485 Option Enabled, Disabled IO=3F8h; IRQ=4, Auto IO=3F8h; IRQ=4, IO=3F8h; IRQ=3,4,5,6,7,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,10,11,12 UART 232, UART 422, UART485 Description Use the Serial port option to enable or disable the serial port. Enable or Disable Serial Port (COM) Select an optimal setting for super IO Device.
EPI-QM67 3.6.2.13.2 Serial Port 1 Configuration Item Serial Port Device Settings Change Settings Device mode 56 EPI-QM67 User’s Manual Option Enabled, Disabled IO=2F8h; IRQ=3 Auto IO=2F8h; IRQ=3 IO=3F8h; IRQ=3,4,5,6,7,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,10,11,12 Standard Serial Port Mode IrDA 1.0 (HP SIR) Mode ASKIR Mode Description Enable or Disable Serial Port (COM) Select an optimal setting for super IO Device.
User’s Manual 3.6.2.14 Hardware Monitor Displays system health status The following system temperature, fan speed and voltage are monitored.
EPI-QM67 3.6.2.15 Serial port Console Redirection Displays COM console information. Item Console Redirection Out-of-Band Mgmt Port Terminal Type 58 EPI-QM67 User’s Manual Option Enabled Disabled COM0 COM4 VT100 VT100+ VT-UTF8 ANSI Description Console Redirection Enable or Disable. Microsoft Windows Emergency Management Services (EMS) allows for remote management of a Windows Server OS through a serial port. VT-UTF8 is the preferred terminal type for out-of-band management.
User’s Manual 3.6.2.16 Intel ICC This Integrated Clock Control option. Item Option Use Watchdog Timer for ICC [Disable] Disabled Enabled Turn off unused PCI/PCIe clocks [Enable] Lock ICC registers[Static only] All registers Static only Description Enable Watchdog Timer operation for ICC. If enabled, watchdog Timer will be started after ICC-related changes. This timer detects platform instability caused by wrong clock settings.
EPI-QM67 Item EIST Turbo Mode CPU C3/6/7 Report Long Duration power limit Long Duration maintained Short Duration power limit TCC active offset Option Description Enable or Disable Intel Speedstep. Disabled Enable or Disable Intel Turbo Enabled Mode. Enable or Disable CPU C3/6/7 report to SO. Long duration power limit in watts, 0 means use factory default. Time window which long duration power is maintained. Short duration power limit in watts, 0 means use factory default.
User’s Manual 3.6.3 Chipset 3.6.3.
EPI-QM67 Item System Agent RC version Option Description Display System Agent RC information. Disabled Check to enable VT-d function on Enabled MCH. Enable or Disable SA CHAP Device. Disabled Enable or Disable SA Thermal Enabled Device. Enable or Disable NB CRID workaround. VT-d CHAP Device ( B0:D7:F0) Thermal Device ( B0:D4:F0) Enable NB CRID 3.6.3.1.
User’s Manual DVMT Total Gfx Mem [128MB][256MB] [MAX] Gfx Low Power Mode Disabled Enabled 3.6.3.1.1.1 Select DVMT5.0 total graphic memory size used by the internal Graphics Device. This option is applicable for SFF only. LCD Control Item Primary IGFX Boot Display LCD Panel Type Option VBIOS Default CRT DVI LVDS HDMI Description Select the video Device which will be activated during POST. This has no effect if external graphics present.
EPI-QM67 Panel Scaling BIA Spread Spectrum clock Chip ALS Support [Auto] [Off] [Force Scaling] [Auto] [Disabled] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] [Off] [Hardware] [Software] [Disabled] [Enabled] [No LVDS] [Int-LVDS] Active LFP Panel Color Depth LVDS back light mode LVDS DC/PWM 64 EPI-QM67 User’s Manual [18 Bit] [24 Bit] PWM DC 00% 25% 50% 75% 100% Select the LCD panel scaling option used by the Internal Graphics Device.
User’s Manual 3.6.3.1.2 DMI Configuration Item DMI Vc1 Control DMI Vcp Control DMI Vcm Control DMI Link ASPM Control DMI Extended Synch Control DMI Gen 2 Option Enabled Disabled Disabled L0s L1 L0sL1 Enabled Disabled Description Enable or Disable DMI Vc1 Enable or Disable DMI Vcp Enable or Disable DMI Vcm Enable or Disable the control of Active State Power Management on SA side of the DMI Link.
EPI-QM67 3.6.3.1.3 Memory Configuration Displays system memory information Item Option [Default DIMM profile] DIMM profile [XMP profile 1] [XMP profile 2] Memory Frequency ECC Support [Auto] [1067] [1333] [1600] [1867] [2133] [Disabled] [Enabled] [Dynamic] [1 GB] [1.25 GB][1.5 GB] Max TOLUD Description Select DIMM timing profile that should be used. Select Memory Frequency in Mhz. Enable or Disable DDR Ecc Support Maximum Value of TOLUD. Dynamic assignment would adjust [1.75 GB] [2 GB] [2.
User’s Manual Enable or Disable MRC fast boot. MRC Fast Boot Force cold reset or choose MRC cold reset mode, when cold boot is required during MRC execution. Force Cold Reset Note: If ME 5.0MB is present, Force cold reset is required! [Disabled] [Enabled] Control Memory Scrambler Seed Generation. Enable- do not generation scrambler seed. Scrambler Seed Generation Off Disable-Generation scrambler seed always. Enable or disable memory remap Memory Remap Channel A DIMM Control above 4G.
EPI-QM67 3.6.3.1.4 Memory Thermal Configuration Item Option Description Enable or Disable Memory Memory Thermal Management Thermal Management Enable or Disable memory temperature to be injected to the PECI Injected Temperature processor vie PECI Enable or Disable routing EXTTS# via TS-on-Board Enabled TS-on-Board’s ALERT# and Disabled THERM# to EXTTS# pins on the PCH.
User’s Manual 3.6.3.1.5 GT – Power management Control Item GT Info RC6 (Pender Standby) GT Overclocking Support Option Description Processor GT info. Only valid if SNB stepping is DO or above Check to enable render standby [Disabled] support. [Enabled] Enable or Disable GT overclocking support. 3.6.3.
EPI-QM67 Item PCH LAN Controller Wake on LAN Board Capability Azalia Option [Disabled] [Enabled] SUS_PWR_DN_ACK DeepSx [Disabled] [Enabled] [Auto] Azalia Internal HDMI Codec Display Logic CLKRUN# Logic SB CRID SMI Lock [Disabled] [Enabled] BIOS Lock GPIO Lock High Precision Timer SLP_S4 Assertion Width Set NAND Management Override 70 EPI-QM67 User’s Manual 1-2 seconds 2-3 seconds 3-4 seconds 4-5 seconds [Disabled] [Enabled] Description Enable or disable onboard NIC Enable or disable integrated L
User’s Manual 3.6.3.2.1 USB Configuration Item EHCI1 EHCI2 USB Ports Per-Port Disable Control Option [Disabled] [Enabled] Description Control the USB EHCI (USB 2.0)functions.
EPI-QM67 3.6.4 Boot Item Option Setup Prompt Timeout 1~ 65535 Bootup NumLock State Quiet Boot GateA20 Active Option ROM Messages Interrupt 19 Capture Boot Option #1/2 72 EPI-QM67 User’s Manual On Off [Disabled] [Enabled] Upon Request Always Description Number of seconds to wait for setup activation key. 65535(0xFFFF) Select the Keyboard NumLock state Enables or Disables Quiet Boot option UPON REQUEST –GA20 can be disabled using BIOS services.
User’s Manual 3.6.5 Security Administrator Password Set setup Administrator Password User Password Set User Password 3.6.
EPI-QM67 Save changes and Exit Exit system setup after saving the changes. Discard changes and Exit Exit system setup without saving the changes.
User’s Manual Save changes and Reset Reset the system after saving the changes. Discard changes and Reset Reset the system without saving the changes.
EPI-QM67 Save changes Save changes done so for to any of the setup option. Discard changes Discard changes done so for to any of the setup option.
User’s Manual Restore Defaults Restore/Load default values for all the setup option. Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the user defaults to all the setup options Launch EFI Shell from filesystem device Attempts to launch EFI Shell application (Shellx64.
EPI-QM67 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
User’s Manual 4.1 Install Chipset Driver (For Intel QM67) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\QM67\Intel® Chipset Software Installation Utility. Note: The installation procedures and screen shots in this section are based on Windows XP operation system.
EPI-QM67 Step 6. Click Next to continue 80 EPI-QM67 User’s Manual Step 7. Click Finish to complete setup.
User’s Manual 4.2 Install ME Driver (For Intel QM67) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\QM67\ME Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step1.
EPI-QM67 Step 6. Click Next to continue 82 EPI-QM67 User’s Manual Step 7. Click Finish to complete setup.
User’s Manual 4.3 Install Nuvoton TPM Driver (For Intel QM67) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\QM67\WinxP_TPM _driver_Installer. Note: The installation procedures and screen shots in this section are based on Windows XP operation system.
EPI-QM67 4.4 Install Display Driver (For Intel QM67) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Video\Intel\QM67. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Next to proceed Step 1. Locate「Driver_Video\Intel\ QM67\Setup.exe」. Step 2. Click Next to extract files.
User’s Manual Step 6. Click Next. Step7. Click Next. Step 8. Click Next to continue Step 9. Click Finish to complete setup.
EPI-QM67 4.5 Install Audio Driver (For Realtek ALC892) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek\ALC892. Note: The installation procedures and screen shots in this section are based on Windows 2000 operation system. Step 1. Locate 「\Driver_Audio\Realtek\ALC892\setup.exe 」 Step 2.
User’s Manual 4.6 Install Ethernet Driver (For Intel 82579LM) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to D:\Driver_Gigabit\Intel\82579LM. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 1. Locate 「\Driver_Gigabit\Intel\ 82579LM」and choose your system OS. Step 2. Click Next. Step 3.
EPI-QM67 Step 6. Click Next to continue installation 88 EPI-QM67 User’s Manual Step 7. Click Finish to complete the setup.
User’s Manual 5.
EPI-QM67 Unit: mm 90 EPI-QM67 User’s Manual
User’s Manual Unit: mm EPI-QM67 User’s Manual 91
