EMX-QM67 Intel® QM67 with Core™ i7/ i5/ i3/ Celeron Mini-ITX Motherboard Quick Installation Guide 1st Ed – 04 February 2012 Part No: E2017MQ6700R
EMX-QM67 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Installation Guide Life Support Policy Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF Avalue Technology Inc. As used herein: 1.
EMX-QM67 and ready to give you the support you need to get the most from your Avalue’s products. In fact, most problems reported are minor and are able to be easily solved over the phone. In addition, free technical support is available from Avalue’s engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. Please do not hesitate to call or e-mail us.
Quick Installation Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EMX-QM67 2.
Quick Installation Guide 2.
EMX-QM67 2.2 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
Quick Installation Guide Display Chipset Intel® GMA HD 2000/ 3000 supports DirectX 10.1, OpenGL 3.0 Display Memory Shared Memory, up to 1.7GB VGA + LVDS, VGA + DisplayPort, VGA + HDMI, DisplayPort + HDMI, LVDS + Dual Display HDMI, LVDS + DisplayPort VGA Onboard, supports max resolution 2048 x 1536 HDMI Onboard HDMI 1.
EMX-QM67 Connectors Label CPU_FAN Function Note CPU Fan Connector SYS_FAN1 System Fan Connector Connectors Label Function COM3 Serial Port COM4 Connector COM5 F_PANEL Intel Front Panel connector JLVDS 24-bit LVDS Connector JBKL1 LCD Inverter Connector JLPC1 LPC Connector FPAUD1 Audio Mic.
Quick Installation Guide JGPIO GPIO Connector JCASE1 Case open Connector USB56 USB 2.
