EES-CDV Fanless Intel® Atom™ D2550 Tiny Box PC with Intel® NM10 Express Chipset Quick Reference Guide 1st Ed – 21 June 2012 Copyright Notice Copyright 2012 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EES-CDV Content 1. Getting Started ............................................................................................................ 3 1.1 1.2 1.3 1.4 1.4.1 1.5 2. Front & Rear View ................................................................................................................... 6 System Dimensions ............................................................................................... 7 1.5.1 Top/ Front & Side (with rubber foot) ..................................
Quick Reference Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EES-CDV 1.3 System Specifications System Board ECM-CDV CPU Onboard Intel® Atom™ D2550 1.86GHz CPU BIOS AMI 16Mbit SPI BIOS System Chipset Intel® NM10 Express Chipset One 204-pin DDR3 SODIMM Socket Supports Up to System Memory 4GB DDR3 800/ 1066 SDRAM SSD One CompactFlash Type I/II Socket HDD 1 x 2.5” SATA HDD/ SSD Watchdog Timer Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min.
Quick Reference Guide Environment & Mechanical +12 ~ +26Vdc (+12V/ 5A Lockable DC Plug Adapter is Power Requirement an Accessory to This System) Single Power ATX Support S0, S3, S4, S5 ACPI ACPI 3.0 Compliant Power Type AT/ ATX (ATX is The Default Setting) 0 ~ 50°C (32 ~ 122°F) (w/ CF & SSD), Ambient w/ Air Flow Operating Temp. 0 ~ 40°C (32 ~ 104°F) (w/ HDD), Ambient w/ Air Flow Storage Temp. -40 ~ 75°C (-40 ~ 167°F) Relative Humidity 0% ~ 90% Relative Humidity, Non-condensing With CF/ SSD: 1.
EES-CDV 1.4 System Overview 1.4.
Quick Reference Guide 1.5 System Dimensions 1.5.
EES-CDV 1.5.
Quick Reference Guide 2. Hardware Configuration Please refer to ECM- CDV Quick Installation Guide or User’s Manual for advanced information. Note: If you need more information, please visit our website: http://www.avalue.com.
EES-CDV 2.
Quick Reference Guide 2.2 EES-CDV connector mapping 2.2.1 2.2.
EES-CDV 2.2.
Quick Reference Guide 2.3 HDD Installation Step1. Remove the 4 screws to disassemble the top cover. Step2.
EES-CDV Step2.2 detached board & metal frame assembly Step3.1 Properly locate HDD on the system enclosure so as to match HDD & enclosure screw holes. Step3.2 Fasten 4 screws through the back of the system enclosure to secure HDD.
Quick Reference Guide 2.4 Memory Installation Step1. Detach the board from the metal frame by removing 4 screws Step 2. Press the SODIMM module right down into the socket, until you hear a click, the two handles of the memory module will automatically lock the module in the correct position. (On the back of the board as above.) To uninstall the memory module, press both handles outward as to automatically eject the memory module.
EES-CDV 2.5 Installing Mounting Bracket (Optional) Step 1. 16 Fasten 4 screws on both sides of EES Embedded System. .