Installation manual

56 Optional Equipment (for qualified installers only)

Travis Industries 4050714 100-01173_001

Fireback Installation

WARNING Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.

1 Remove the glass frame and logs.

2 Remove the front and rear burners

(see page 52).

3 Remove and discard the hearth

plate.

4 Install the firebacks following the

directions below.

Hearth Plate

Place the rear fireback in in place. The

side fireback holds the rear fireback in

place - hold the rear fireback while

installing the side fireback.

Remove the screws and

clips on both sides.

Place the side firebacks

in place. Secure using

the screws and clips

removed in step “a”.

Place the floor

firebacks in place.

5 Restore the fireplace to the correct configuration.