Installation manual

52 Finalizing the Installation (for qualified installers only)
Travis Industries 4050714 100-01173_001
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Remove the glass (see page 42). Remove the logs and coals (if installed - page 47)
2 Remove the burner (see illustration below).
Remove the grate.
1/4" Nutdriver
Remove the
front burner.
Remove the two screws
holding the rear burner in
place. Slide the burner to
the right to remove.
Remove the rear log shelf
and intake restrictor.
Rear Log Shelf
Intake Restrictor
1/4" Nutdriver