Installation manual

Installation (for qualified installers only) 17

Gas Line Location

The gas inlet is located 3" above

the base of the fireplace.

6-1/4"

10-3/4"

Right Side Gas Inlet (preferred)

Left Side Gas Inlet

A 2" high by 3" wide opening is located

behind the gas inlet cover plate (it is 1-3/8"

above the base of the fireplace).

A 2" high by 3" wide opening is located

behind the gas inlet cover plate (it is 2"

above the base of the fireplace).

You may remove this cover plate to install the gas line. The

cover plate has a 7/8" diameter hole (covered with a push

plug) in line with the gas inlet on the gas control valve. By

rotating the plate 180° the hole may be re-located. You may

also secure the plate in a customized location using the self-

drilling screws.

You may remove this cover plate to

install the gas line. The cover plate has

a 7/8" diameter hole (covered with a

push plug). By rotating the plate 180°

the hole may be re-located. You may

also secure the plate in a customized

location using the self-drilling screws.

A 12" flex tube and shutoff valve is

included with the fireplace. The

shutoff valve accepts a 1/2"MPT.

A 12" flex tube and shutoff valve is

included with the fireplace (you may

wish to use a 24" flex tube). The

shutoff valve accepts a 1/2" MPT.

6-1/4"

10-3/4"