Installation manual

19
Seattle™ HO (High Output)
Heating Capacity:*
Up To
1,400 Sq. Ft.
Maximum
Btu/Hr. Input:
35,000 (NG & LP)
Minimum
Btu/Hr. Input
10,400 (NG)
7,500 (LP)
Steady State
Efciency Rating:*
72% (NG)
73% (LP)
11
T
his break through replace oers a choice of three dierent burner options: the Award-Winning Ember-Fyre burner and 7-piece logset
with embers, the entry level Dancing-Fyre burner with 6-piece logset, embers and black painted interior or the contemporary Diamond-
Fyre II burner with choice of Fyre-Stone™ rock kit or Driftwood Fire Art™. e Seattle HO gas replace is sure to keep things warmed up
year-round with a heat input of 35,000 BTU’s and the ability to heat up to 1,400 square feet. is high eciency replace oers a turndown
ratio of up to 71% (NG) or 79% (LP). is gives you the ability to turn down both ame and heat so you can use the replace year round
either as a great home heater or when you just want a beautiful ame without all the heat. e Seattle HO comes with standard convection
fans with 180 total CFM.
Victorian Lace
Face, Black
Enamel Fireback
and Driftwood™
log set
SEE VIDEO
of this product burning
Web address:
vimeo.com/28206014
Canada EnerGuide
Eciency Rating:
64% (NG)
66% (LP)
Glass Area:
31 3/8” W
18 1/8” H
(564 Sq. In.)
Basic Face
Dimensions:
32 1/2” W
27 5/8” H
*Gas appliance performance can be affected by negative pressure in the home and by prevailing atmospheric conditions. Efficiency may vary depending on vent configuration and atmospheric conditions.