Installation manual

Optional Equipment (for qualified installers only) 61

15 Place the fan controller near the front of the fireplace to the left and connect it to the wiring

harness (see Figure 22). Attach the power cord from the fan controller to the AC connection (see

Figure 23). MAKE SURE TO TURN THE FAN CONTROLLER ON (“-“ SYMBOL).

Figure 22

Figure 23

16 Disconnect the power lead from accent light and connect it to the power lead included with this kit

(see Figure 24). Attach the power lead to the fan controller in the “AUX OUT” receptacle (see

Figure 25).

Figure 24

Figure 25

NOTE: If using the optional fan, you will want to disconnect its power lead and connect it to

the extra power lead included with this kit, then connect it to the “FAN” receptacle on

the fan controller.