Installation manual

60 Optional Equipment (for qualified installers only)
© Travis Industries 4100728 100-01254_000
12 Attach the wiring harness to the burner control (see Figure 17). Attach the gas control valve
molex connector (see Figure 18).
Figure 17
Figure 18
13 Attach the blue and white wires to the IPI/CPI switch (see Figure 19). Connect the wiring
harness to the stepper motor (see Figure 20).
Figure 19
Figure 20
14 Attach the wiring harness to the comfort control valve connection (see Figure 21).
Figure 21