Installation manual

52 Optional Equipment (for qualified installers only)

Andiron Installation

The optional andirons should be installed prior to installing the logs. See the directions below for

installation.

1 Remove the grate from the

firebox. Remove and discard

the two andiron prongs (see

step “a” to the right).

NOTE: The nuts do not need to

be removed, they can be

loosened to remove the prongs.

2 Attach the andiron brackets

(shipped with the fireplace) to

the grate (see step “b”).

3 Attach the andirons the the

andiron brackets using the

screws included with the

andirons (see step “c”).

5/32 Hex

Wrench

11/32" Nutdriver