Installation manual

Installation (for qualified installers only) 41

Fireback Installation

WARNING:

Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.

1. Remove the grate.

2. Install the firebacks following the directions below.

Place the rear fireback in place. The side

fireback holds the rear fireback in place -

hold the rear fireback while installing the

side fireback.

Remove the clips on both sides (these clips have key-

holes, allowing removal without removing the screw)

Place the side firebacks

in place. Secure using

the screws and clips

removed in step "a".

Place the floor

firebacks in place.

5/16" Nutdriver