Service manual

Trim Parts
40H Series Service Manual 5–19
Screw kits The components of screw kits are described in the table below.
Figure 5.23 shows the components included in each screw kit.
Qty. per kit
ItemDescription 12345
1 Faceplate screw (#8-32 × 1/4″ PHFHMS)
a
a. Security head option accepts T15 bit.
22
2 Strike screw / case mounting screw
(#12-12 × 3/4″ PHFH)
b
b. Security head option accepts T25 bit.
44
3 Trim plate mounting screw (#8-32 UNC-2A)
c
c. When the thick door option is selected, a longer screw is provided.
22
4
J alignment plate mounting screw
(#8-32 × 1.75″ UNC-2A POHMS)
a, c
1
5 Thumb turn mounting / emergency access
plate screw (#6 × 1/2″ POH)
2
6
M/N escutcheon screw (#10-32 × 2 1/8″ )
b, c
2
7 Shuttle guide pin 2
8 Hub toggle screw 2
9 Self tapping screw (TD, HJ, BW functions) /
Visual indicator bracket mounting screw
12
10 Socket set screw for lever handle
d
d. Security head option accepts spanner head bit.
1
11 Upper J escutcheon screw
(#6 × 5/8″ POH surface mounting)
1
12 Single dummy trim mounting screw
(#8 × 1″ PFH surface mounting)
2
Figure 5.23 Screw kit components
1
2
3
4
5
7
6
8
12
11
9
10