Owner`s manual

6 Specifications

Features:

- Ember Fyre™ Burner for "Wood Fire" Look

- Works During Power Outages (battery backup system)

- High Efficiency

- Optional Thermostat or Remote Control

- Optional Blower for Quicker Heat Distribution

- Convenient Operating Controls

- Variable-Rate Heat Output

- Accent Light

Installation Options:

- Freestanding Stove

- Horizontal or Vertical Vent

- Residential or Mobile Home

- Straight or Corner Placement

- Bedroom Approved

Heating Specifications:

Approximate Heating Capacity (in square feet)* ........... 500 - 850 with Blower, 500 to 650 Without

Maximum Input (in BTU’s) ..............................................................................22,000

• Heating capacity will vary depending on the home’s floor plan, degree of insulation, and the outside temperature.

Dimensions & Weight:

NOTE:

Measure side, corner, and back

clearances from the stove top.

26-1/2"

673mm

The flue collar protrudes 1-3/8"

(35mm) above the stove top

11-1/2"

292mm

21-1/4"

540mm

The flue collar protrudes 3-7/8"

(98mm) behind the stove top

14-3/8"

365mm

16"

406mm

Weight 130 Lbs. (59 Kg)

21-1/4"

540mm

Electrical Specifications (including optional blower)

Electrical Rating ............................................................. 120 Volts, 1.5 Amps, 60 Hz (180 watt)

Fuel:

This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using

the included LP conversion kit. The sticker on top of the gas control valve will verify the correct fuel.