Owner`s manual

46 Optional Equipment (for qualified installers only)

3 Follow the directions below to replace the orifices.

Screw each LP orifice in so the

orifice protrudes 15/16" (24mm)

(indicating full insertion).

Look here for the orifice identification

Apply thread sealant to the LP

orifices prior to installation. Use

the chart below to identify the

correct orifices.

Front

Rear

#54

#52

#64

#58

1/2" Wrench

Use a 1/2" open end wrench

to unscrew the two orifices.

Front Burner Orifice

Rear Burner Orifice

15/16"

24mm