Owner`s manual

Installation (for qualified installers only) 11
© Travis Industries 4091026 100-01238_000
Top to Rear Vent Modification (continued)
Install the inner flue
assembly and exhaust cover
plate. Make sure the
attached gaskets are in
place and form an air-tight
seal.
NOTE: Install the flue
assembly with the diffuser
to the bottom.
Install the outer flue
assembly, cover plate, and
gaskets. Make sure the
gaskets are correctly
positioned and form an air-
tight seal.
The flue cover with a cutout may be discarded. Use the
flue cover designed for rear vent applications.