Installation manual

GreenSmart™ Remote (2010 Version)
SKU 99300685 (NG) SKU 99300684 (LP)
Page 14 of 14 4/14/11 - 17601643 © Travis Industries, Inc.
Low Battery Indicator
Transmitter Batteries
The transmitter has a battery-level indicator. When it indicates low battery voltage (see Figure 18 below),
install four new AAA alkaline batteries into the transmitter (see “Transmitter Battery Installation” on page
7).
ON
F
AUX
Low Battery Indicator
MAX
Figure 18
Receiver Batteries
The receiver will “beep” periodically when the receiver batteries go low. Install four new AA alkaline
batteries into the receiver when this occurs (see “Receiver Battery Installation” on page 7). In
applications where the appliance is required to provide heat, we recommend replacing the batteries
before each heating season.
Child Proof Feature
The child proof feature disables the control buttons, preventing un-wanted use of the remote.
 Press both the MODE and UP buttons simultaneously to turn this feature on and off (see Figure
19 below).
HINT
: This feature is especially useful while using the thermostat setting.
ON
F
AUX
Child Proof Indicator
MAX
Figure 19
Power Outages
The remote will work if household current (AC power) is disconnected. The batteries inside the receiver
will continue to power the heater but the accent light and blower will not operate.