Installation manual

GreenSmart™ Remote (2010 Version)
SKU 99300685 (NG) SKU 99300684 (LP)
Page 13 of 14 4/14/11 - 17601643 © Travis Industries, Inc.
Mode Controls (continued)
Accent Light (Aux)
The Accent Light (night light) inside the heater may be turned on and off using the up and down buttons
when in Accent Light (Aux) Mode (see Figure 15). The center display will display either “ON” or “OFF”.
OFF
F
AUX
When in accent light
mode, this icon will
appear darkened.
This is the accent light read-
out. Use the up button to turn
on, down button to turn off (2
settings).
On
Off
Figure 15
HINT: The rheostat on the heater must be turned on for remote operation to work correctly. You may
wish to adjust the rheostat to a desirable light output prior to operating.
HINT
: If you wish to leave the accent light on while turning the burner off, adjust the Flame Height to
“OFF” (see the previous page).
Comfort Control (rear burner)
The comfort control (rear burner) may be turned on and off using the up and down buttons when in
Comfort Control Mode (see Figure 16). The center display will display either “ON” or “OFF”.
OFF
F
AUX
When in comfort
control mode, this
icon will appear
darkened.
This is the comfort control
read-out. Use the up button
to turn on, down button to turn
off (2 settings).
On
Off
Figure 16
Display Fahrenheit or Celsius
 With the system in the “OFF” position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C) (see Figure 17 below).
F
C
F
Figure 17