Use and Care Manual

9
Replacing the Filters
After replacing the filters, use the following instructions to reset the filters based
on your model. If you do not properly reset the filters, the filter change indicator
will continue to alert you.
Press and hold the nightlight button for 5 seconds. Press and hold this
button until the filter indicator stops blinking.
A9CTELECTRICSS, A9ELECTRICBLK, A9ELECTRICWHT
Press and hold the filter reset button located on the left side of the unit. Press
and hold this button until the hot and cold indicator lights stop blinking.
A8CTBOTTLELESSBLK, A8CTBOTTLELESSWHT, A12- CTPOU, A15
filter
nightlight
heating cooling
Countertop Water Coolers