A few simple steps to ensure perfect water, every time.
1
Filter Installation Instructions If you are having trouble with your water cooler please see the following solutions. You can also view our trouble shooting videos at the website below. Please feel free to contact us with any questions. 1-800-256-0695 support@avalonproducts.com bit.
Contents About Your Filters Tech Specs 5 Countertop Water Coolers Replacing the Filters 7-10 Standing Water Coolers Replacing the Filters 3 11-14
About Your Filters 4
About Your Filters Tech Specs Activated Carbon Filter Rated Flow 0.5GPM 1.9L/min Max Purified Water Capacity 1500 US gal (2839L)/6 months The Maximum Working Pressure 125PSI Maximum Operating Tempurature 100°F This product conforms to NSF/ANSI 42 and 53 for the reduction of Chlorine taste and odor, nominal particulate class I, lead and cysts. Sediment Filter Rated Flow 0.79GPM 1.
Countertop Water Coolers 6
Countertop Water Coolers Replacing the Filters 1. Shut off the valve located at the connection to the water source or the valve located to the left of the Sediment filter on the back of the unit.
Countertop Water Coolers Replacing the Filters 2. Twist the expired filters to remove them from the Filter Adapters at the back of the unit or inside the side cabinet depending on the model. Insert the new filters into the Filter Flushing Adapters by twisting them into place and rotating them clockwise. Make sure the “Sediment” filter is on the left side of the “Carbon Block” filter for models that have both filters hanging on the back or both filters in the side cabinet.
Countertop Water Coolers Replacing the Filters After replacing the filters, use the following instructions to reset the filters based on your model. If you do not properly reset the filters, the filter change indicator will continue to alert you. A9CTELECTRICSS, A9ELECTRICBLK, A9ELECTRICWHT Press and hold the nightlight button for 5 seconds. Press and hold this button until the filter indicator stops blinking.
Countertop Water Coolers Replacing the Filters In order to flush the new filters, allow the water to flow from the cold water spout for approximately 2 minutes.
Standing Water Coolers 11
Standing Water Coolers Replacing the Filters 1. Shut off the valve located at the connection to the water source or the valve located to the left of the Sediment filter inside the cabinet. 2. Twist the expired filters to remove them. Insert the new filters into the filter adapters by twisting them into place and rotating them clockwise. Make sure the Sediment Filter is on the left and the Carbon Block Filter is on the right.
Standing Water Coolers Replacing the Filters After replacing the filters, use the following instructions to reset the filters based on your model. If you do not properly reset the filters, the filter change indicator will continue to alert you. A5BOTTLELESS, A7BOTTLELESS, A13 After replacing the filters, press and hold the filter reset button located on the upper left side of the cabinet.
Standing Water Coolers Replacing the Filters In order to flush the new filters, allow the water to flow from the cold water spout for approximately 2 minutes.
