Use and Care Manual
11
Installation (Under the Sink)
Installing the Metal Adapter with Valve
4. Remove the nut from the Metal Adapter 
and insert the PE Tubing through the nut. Slide 
the PE Tubing onto the protruding part of the 
Metal Adapter where the nut was located 
until it reaches the threading.
5. Screw the nut tightly into place to keep the 
PE Tubing securely connected to the Metal 
Adapter with Valve. Make sure the valve is 
in the o position (perpendicular to the PE 
Tubing).
Getting Started










